User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            SD104A-1 Sweep Rate Sub
DATE:                  08-Sep-95
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       6
NUMBER OF LINES:       79
CONFIGURATION:         HP 5335A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  HEAD         {}
  1.002  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.003  HEAD         {º Sweep Times º}
  1.004  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.005  HEAD         {Linear Sweep, Rate=10}
  1.006  HEAD         ÍÍ Sweep Times ÍÍ
  1.007  JMP          2.001
  1.008  EVAL
  2.001  DISP         ÿÿÿÿÿÿÿÿSet the UUT as follows:
  2.001  DISP         Mode Switch ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] SINGLE LINEAR
  2.001  DISP         SWEEP RATE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10
  2.001  DISP         MULTIPLIER (B) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10
  2.002  DISP         Connect the J23 on the UUT to CH A of the
  2.002  DISP         HP 5335A counter.
  2.003  IEEE         [@5335][TERM LF]
  2.004  IEEE         [@5335]IN[D1000];
  2.005  IEEE         [@5335]FN2;GM0;GA.25;CO1;
  2.005  IEEE         [@5335]TR1;AT3.5;BT2;
  2.006  DISP         On the UUT depress the RESET DOWN button.  The LED above
  2.006  DISP         the button should be on.  Now depress the SWEEP UP
  2.006  DISP         button.  That LED should go on and the RESET DOWN LED
  2.006  DISP         should extinguish.
  2.007  HEAD         [27][91]5m**PLEASE WAIT. LONG GATE TIME!**[27][91]m
  2.008  IEEE         [@5335][T0][I]
  2.009  HEAD
  2.010  ACC          49.95T         0.001%
  2.011  MEME
  2.012  MEMC         T              0.500U        mult=10
#!          Test Tol 0.5, Sys Tol 0.0004995, TUR 1001.001 (>= 4.00).
  3.001  HEAD         ÍÍ Sweep Rate ÍÍ
  3.002  DISP         ÿÿÿÿÿÿÿÿSet the UUT as follows:
  3.002  DISP         MULTIPLIER (B) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 1
  3.003  IEEE         [@5335]IN[D1000];
  3.004  IEEE         [@5335]FN2;GM0;GA.25;CO1;
  3.005  IEEE         [@5335]TR1;AT3.5;BT2;
  3.006  DISP         On the UUT depress the RESET DOWN button.  The LED above
  3.006  DISP         the button should be on.  Now depress the SWEEP UP
  3.006  DISP         button.  That LED should go on and the RESET DOWN LED
  3.006  DISP         should extinguish.
  3.007  HEAD         [27][91]5m**PLEASE WAIT. LONG GATE TIME!**[27][91]m
  3.008  IEEE         [@5335][T0][I]
  3.009  HEAD
  3.010  ACC          499.5T         0.001%
  3.011  MEME
  3.012  MEMC         T              5.00U         mult=1
#!          Test Tol 5, Sys Tol 0.004995, TUR 1001.001 (>= 4.00).
  4.001  HEAD         {}
  4.002  HEAD         {Log Sweep, Mult.=10, Rate=10}
  4.003  HEAD         ÍÍ Sweep Rate ÍÍ
  4.004  JMP          5.001
  4.005  EVAL
  5.001  DISP         ÿÿÿÿÿÿÿÿSet the UUT as follows:
  5.001  DISP         Mode Switch ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] SINGLE LOG
  5.001  DISP         MULTIPLIER (B) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ[16] 10
  5.002  IEEE         [@5335][TERM LF]
  5.003  IEEE         [@5335]IN[D1000];
  5.004  IEEE         [@5335]FN2;GM0;GA.25;CO1;
  5.005  IEEE         [@5335]TR1;AT3.5;BT2;
  5.006  DISP         On the UUT depress the RESET DOWN button.  The LED above
  5.006  DISP         the button should be on.  Now depress the SWEEP UP
  5.006  DISP         button.  That LED should go on and the RESET DOWN LED
  5.006  DISP         should extinguish.
  5.007  HEAD         [27][91]5m**PLEASE WAIT. LONG GATE TIME!**[27][91]m
  5.008  IEEE         [@5335][T0][I]
  5.009  HEAD
  5.010  ACC          18.0T          0.001%
  5.011  MEME
  5.012  MEMC         T              0.10U
#!          Test Tol 0.1, Sys Tol 0.00018, TUR 555.556 (>= 4.00).
  6.001  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.